White High Gloss Polyolefin, 8.5 x 11, HP Indigo Printable, 50 Sheets per Box
	Quantity in Basket:none Code: WGPO-50 Price:$49.00 Volume Price Quantity Price Each 2-4 $45.00 5+ $42.00
	Quantity:
White High Gloss Polyolefin, 8.5 x 11, HP Indigo Printable, 50 Sheets per Box Face stock: 3.6 Mil White High Gloss Polyolefin Film for HP Indigo. Can also be run on many types of laser printers. Face stock Description: Suitable for medical equipment, nameplate and brand identity labels when aesthetics and durability are critical. Reinforces product branding and product quality when labeling must identify the product and its manufacturer as well as display graphic images. These pressure sensitive labels are ideal to support high quality printing and superior legibility.The film is able to resist a variety of environmental stresses and end uses while maintaining a secure bond for the life of the product. The pressure sensitive film and adhesive provides a critical combination of durability, aesthetic appeal and efficiency for brand identification. Topcoat is compatible with HP Indigo inks and ensures excellent ink receptivity for sharp vibrant image quality. Varnishing or over laminating is recommended to protect graphics from abrasion when long life is required. This material can also be run on many laser and digital printers. Not compatible with inkjet printing. Sheet Size: 8.5 x 11 Sheets Per Box: 50 Lbs. per Box: 3 Adhesive: Adhesive Thickness - 1.0 Mil The permanent acrylic adhesive provides a permanent bond to a wide range of surfaces. Designed to bond well to a variety of challenging medical equipment surfaces. Adhesive has high peel and high shear characteristics resistant to cold flow and ooze. Liner: Backed with a 90 lb. two-side poly coated lay flat release liner ideal for sheet-form converting Total Product Caliper: 11.5 mils Film Thickness 3.6 Mil Liner Thickness 6.9 Mil ADHESION PROPERTIES Ultimate Peel from Average TEST METHOD ASTM D 903 (Modified for 72 hour dwell time)   Oz/In (N/m) ABS 46 (506) Acrylic 52 (572) Acrylic Powder Paint 41 (451) Epoxy Powder Paint 47 (517) Glass 42 (462) HDPE 23 (253) Polyester Powder Paint 29 (319) Polypropylene 16 (176) Polyurethane Powder Paint 41 (451) Stainless Steel 47 (517)   EXPECTED SHEAR Room Temp (hours) 15 ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load Tack (gm/sq cm) 740 ASTM D 2979 Expected Exterior Life Indoor use only Service Temperature Range -40°F to 176°F (-40°C to 80°C) Minimum Application Temperature 32°F (0°C) Storage Stability One year when stored at 70°F (21°C) and 50% relative humidity       *Important Notice These are typical values and should not be considered a specification.

Product Performance and Suitability All the descriptive information, the typical performance data, and recommendations for the use of and products offered on www.PressLabel.com shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Because of the variety of possible applications for these products and the continuing development of new applications, all products are sold with the understanding that each purchaser will independently determine the suitability of any product for the purchaser's intended application. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by www.PressLabel.com and/or Infomotion Corporation. No distributor, salesman or representative of www.PressLabel.com and/or Infomotion Corporation is authorized to give any warranty, guarantee, or to make any representation in addition or contrary to the above.